Really liked the way the RSa's turned out. I did a whole series on my Infinity's and Infinity connected projects a couple years back. Looks like there might only be one cap according to Klaus's website? Recap would be easy enough though you may have to rip the crossover out (it may be stapled and glued to the cabinet) or remove the woofer and replace the cap through the woofer opening. 3.2 to 3.6 readings are "normal" resistance (ohms) readings. And using a multimeter you could also make sure the EMIT is good. It may sound "odd or scratchy" since there is no midrange or bass playing. With low bass and loudness settings, at low volume, just long enough to hear if the EMIT is working. You could try wiring the EMIT directly to the speaker wires USING CARE not to let the wires touch each other (shorting out and you'll have even more issues). Can check fuse with a multimeter as well.Īre the fuse holder terminals tight against the fuse (making solid connection).? Either replace with a known good fuse or swap the fuse from the working working cabinet to the other speaker. Is the fuse good? "looks good" isn't enough. Need advice! I'll post pictures in the morning. I removed the tweeter and the woofer on the L speaker to check the connection - I could feel the foam and the connectors back there and as far as I can tell, everything is connected. Still same issue.Īs a last resort, I swapped the tweeters from one speaker to the other, and the tweeter that was on the L channel now is working fine on the R channel. The tweeter setting knob on the back of both speakers is set to center. I noticed that no sound was coming out of the L tweeter and I thought WTH?! I rechecked the speaker cable as well as the speaker connectors on both my receiver and the speakers themselves. I finally had a chance to hook them up and was listening to my favorite classic rock station here in Chicago. Recently, I bought a pair of EMIT tweeters from a fellow AKer for a very good price. I picked up a pair of RSe speakers w/o tweeters for about $10 a year or so ago with the intention of finding a replacement pair of EMIT tweeters.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |